Sure enough, when the kit arrived (they have to be ordered direct from NZ), it oozed quality. The mouldings are superb, crisp and detailed like they should be. The decals are gorgeous, including lozenge patterns for the wings, and the instruction book (it seems crass to call it a "sheet") would not look out of place in a reference library. WW have really done their homework, including a myriad of reference photos and additional information that would more than satisfy any plane enthusiast, let alone a modeller. So how does it build?
With the engined dropped into its bay, it was time to close up the fuselage. This is one of the few areas in which I had a little trouble. The fuselage halves would simply not close properly around the cockpit and engine and it took some judicious trimming of the spars to get everything together. Even then there was a small gap in front of the cockpit opening that needed careful filling. I also constructed the machine guns at this stage, although I left them off the model until later in the build. WW provide an option for either "basic" solid moulded guns or detailed ones using photo etch shrouds and sights. Of course, I chose the latter which while fiddly, looked fantastic once put together and painted.
So after "plugging the holes" to mask them she was ready for painting. I started with an overall coat of Tamiya grey primer, important because my chosen scheme was part pure white, which always benefits from a good primer. The chosen scheme (Hans Muller, Jasta 18) consists of a red front half and white rear half of the aircraft. So I started by spraying the rear half white, albeit a slightly "dulled" white incorporating a few drops of dark grey and dark yellow. Pure white never looks realistic! I then masked this off and moved on to the red front half (which includes the wings). I will lay a little rare criticism at the feet of Wingnut here, their paint references are a bit hit and miss, particularly with regard to the fuselage colours. They suggested Tamiya X-7 for the red. This is a pure, bright, primary red and would never have been seen on any WWI German aircraft. They tended to use what they called "carmine" which is red but with a more brown/purple hue. To be fair, the printed representation of the scheme looks about right to me, just ignore the call out. So I mixed up my own version of this, which was actually based on Tamiya Hull Red (XF-9) but brightened up a bit with some pure red and a few drops of yellow. I used this to coat the front of the aircraft and the upper wing section.
The marking decals look very thick and glossy on the sheet, but are actually quite thin once detached, and remarkably they appear to have no discernible excess carrier film either, which is a first. They are printed by Cartograf, as are all decent decal sheets, who really seem to have perfected the art these days. But be warned, the thin nature of the decals combined with their size (particularly the iron crosses for the wings) does make it tricky to eliminate every last wrinkle. At this stage I was glad I was not working on the Jasta 16b example which contains all-round body decals. But they settled on without too much trouble, and once finished all was sealed in with more Klear.
Finally came the point all biplane modellers dread, attaching the upper wing section. I had been preparing myself for this for hours, having had some extremely bitter experiences in the past doing this. The problem is that the struts and upper wings almost never line up in any dimension, and when you get one end seated the other pops out and/or the struts collapse, and once everything is finally in place you find the top wing wildly misaligned from the rest of the plane - if you've ever tried it you'll know what I am on about. So with some trepidation I lay the top wing section upside down on the bench, placed a drop of glue in each of the strut locator holes, offered up the plane body and prayed.
Next, on went the wheels and tail skid. The only other part to install was the huge wooden propeller. Now, there are a hundred and one "open secrets" out there on line from all sorts of experts on how to get a really good wood grain effect on a plastic propeller (or any other part for that matter). Most involving primers, oil paints, hours (if not days) of drying time, sponges, flat brushes, leaves from the garden and a multitude of other family recipes. But let me tell you, with a bit of practice and nothing more than a bog standard medium brush and acrylic paints you can get a superb result. I used three colours, a mid brown/orange mix, dark yellow and dark brown. First I coated the prop with the medium hue, then "damp brushed" the lightest colour down the grain using just enough residual paint to leave streaks without covering. I gave the brush a little wiggle as I went to create a slightly varied grain pattern. Next, I did the same with the dark hue but more sparingly, following the same contours. Looked pretty good to me, but the final touch is gloss varnish, which brings out the grain as if it were the real thing. All done in ten minutes. Judge for yourself from the photos, but it looks pretty convincing to me!
With my guitar string method, it is important to pre-stretch the string to make it as straight as possible, best way to do this is to put it on a guitar for a day and keep tuning it! Then it is a matter of trimming sections to the right length, and there is no substitute for trial and error here, to get it sitting perfectly in place without bowing. Once established, a small drop of cyano glue on each anchor point holds everything together. It is still a very time consuming and at times frustrating process but I got there in the end, finishing things off with a stroke of matt black paint down each wire.
And so she was all finished. I have to say this is up there with the best kits I have ever built, although being a slightly unusual subject compared with many of my recent projects it is perhaps a little hard to compare fairly. But there is no doubting that Wingnut Wings have hit a winning formula here, producing exquisite kits of the planes of this era that are awesome in their detail but also, and most importantly, extremely enjoyable to build. I very much look forward to my next one!
